How to Choose the Right Computer Repair Tech the First Time

Have you ever wondered how you can know you’re picking the right computer support company?

Are you concerned about spending more than you need to on your computer support services?

Did you ever have a tech come out to fix your system just to tell you that you needed to buy a new computer without even really trying to repair yours?

You probably realize how important it is to choose your computer support company wisely and to have an knowledgeable technician providing service to you so you can get your computer repaired speedily and properly and at a fair price.

The sad fact is, that all too often, a person goes through a few hard experiences before they get a good technician or company.

Commonly, after a person goes through a few bad experiences, they understand that the one they eventually were comfortable with is the supplier that has had the most experience in computer repair service.

In the next several paragraphs I will share with you some very helpful information I have acquired of my 16 years as an executive in the I.T. industry and why it is essential to know.

Early on in my tech career, I found that when I hired new employees, I would always get the better employees from those prospects that had a resume of long-term hands-on experience in the tech skill for which I was recruiting. All too frequently, and nearly without fail, after hiring candidates that were fresh or recently out of schooling with all their certificates and academic degrees, the employees would come either to myself or one of the ranking I.T. managers to solve even the most elementary of problems.

The reason this occurred? The employees’ lacked knowledge of the main processes and relationships active in computer technology that enable a person to draw educated conclusions to solve problems. Put plainly, they did not understand how things work. And how could they? They had plenty of book and lab knowledge, enough of theory, but no real-world working knowledge. This knowledge can only come from years of experience.

In general, this is what happened, but it was not always the case. There were decidedly the special gems that hung in so hard to figure out a trouble, never giving up, exploring, making repeated tries, and finally solving the problem whilst gleaming that knowledge they needed along the way. But in general, the best outcomes we ever measured came from those with a lot of hands-on and subject experience.

You might be saying: “Sure, that’s all great, but how does that help me choose a good computer support company or technician for my needs?”

Well, in effect, when you, the consumer, select a company to supply you with computer support service, you are hiring them just as you would an employee for yourself. And with that in mind, you want to make sure you engage someone with experience to get the job done properly and at a fair price.

One of the most irritating things that I have experienced over my many years in the industry is when the supplier, employee or vendor quickly determines that the single solution to my problem is to buy new equipment. That instantly becomes a reason for worry for me when this happens. I begin to doubt their competency in being able to provide me with good service and wonder if they have an secret motive. Sometimes I question if their actual objective is just to get me to buy new stuff from them, not always keeping my best financial interests in mind. Sure, sometimes it does make sense to invest in upgraded equipment, but I want to know that doing so is necessary and/or beneficial to me in some way. To quickly form such a conclusion that cannot by and large be arrived at without first putting forth an attempt to properly diagnose and troubleshoot the trouble is unreliable. When that effort is not evident to me, I am highly questionable of a recommendation to spend money on new equipment, as should any wise individual.

This is similar to numerous experiences that my own customers have conveyed to me where they too have had a service provider race to recommend that they buy new or upgraded equipment. Sometimes, it was found out, and too frequently, that the service provider had an interest in selling the new equipment or service either through some commission agreement or revenue sharing arrangement. In effect, this motivated the service provider to sell rather than repair equipment, and oftentimes when it was not necessary.

Try to find a company that practices frugalness and tries to avoid needless costs and waste. Sometimes all an individual can afford is only what they require to get by on. The technician you select should work with you and your budget.

The personality of the technician you choose is important as well.. A company’s technicians should be very approachable and genuine and exhibit professional and responsible conduct. If you have ever dealt with some companies, particularly the big chain ones, then you may have experienced a tech that made you feel unschooled or ignorant, or was frustrating to you. Thats regrettable. Techs are there to supply you with great service, not to bolster their own self-worth by exhibiting some kind of superiority complex about their accomplished expertise. Look for seasoned and educated technicians doing their best to help you out and explain things in everyday words to help you understand what’s going on. Stuff happens to computers, its just a fact of life. So don’t feel bad when it does, and avoid those self-important ego-driven tech people.

Beware of guarantees that in effect say, “If we can’t fix it, you don’t pay.” Here is why. From the consumer’s stand point, this sounds like a good way to feel secure that they won’t risk paying money for a failed tech call, and for the company, it is a great selling instrument, but truth be stated, if it were executed at face value, it could mean economic self-destruction for the company. Why are those guarantees even provided? First of all, I advise you read the small print. You will have to sign a service agreement and there may be something in there that spells out precisely how that “guarantee” applies. In general practice, these guarantees expect the client to accept any resolution that the technician provides to solve the problem, even up to and including requiring them to buy totally new equipment. And in that lies their “fix”, as in the phrase, “If we can’t fix it… Get it? Then, if the client refuses the fix, the guarantee does not apply. These guarantees look great up front, but is really not even logical to expect it. A company is not going to gamble and risk losing money. Realistically, a person should expect to pay something when a tech comes out or they take a computer in for repair, irrespective of the final result. It just should not cost an arm and a leg.

Not every trouble can be fixed as expected. The technician really never knows what the extent of the problem is until they are able to get into the equipment and look into the problem. Sometimes the cost of a repair can be more than it is worth to the client. And sometimes, it costs to arrive at that decision. A diagnostic and/or troubleshooting fee is common in these situations.. After all, you were still provided with service to determine what is required to be done to repair the trouble. When choosing a company or technician, make sure to know the fee schedule in these situations. Numerous support companies will even credit a share or all of the diagnostic fees towards succeeding patronage or the purchase of new equipment from them if so decided by the client. If they do not provide any sort of fee credit, then the fee should be minimum, commonly an amount of money sufficient to address the company’s expense of dispatching a tech out to the client.

There are most invariably mileage or travel fees for on-site servicing.. Naturally this is because time is money, and the company has to pay expenses of the technician by the hour, irrespective of whether they are being productive on-site or just sitting in traffic. Look for the best deal you can find when added to the on-site hourly or flat rate.

Finally, I wish to convey to you, that you should select a company or technician that will empower you with the ability to help keep the problem from happening again. If the reason can be found, the technician should explain what measures, if any, that can be taken to possibly prevent recurrence. Sure, they could take your money for another on-site visit for the identical trouble at a subsequent date when it repeats, and do that over and over, but that would be unethical and downright dishonest in my judgment. Search for a company or technician willing to help you with an ounce of prevention through some suggestions so you can save the pound of cure in expense later.

The bottom line is this. When selecting a computer repair company or technician, do a little research. Ask them questions, how long have they been around? What is their background? Google them on the Internet. Look up the names of the principles of the company. Get testimonials from acquaintances or associates. However you do it, just do it before deciding on whom to hire.

Have You Heard About the Tech Deck Skateboard?

Tech Deck skateboards are just like the real thing – well, almost like the real thing. There is a difference in size and you cannot actually ride on them; at least not using your legs and feet. Instead, you use two of your ten fingers. All you will need is your imagination and two fingers; your index and middle fingers.

Finger skateboarding is very popular, with both kids and adults. These boards have the same characteristics as the real thing; they include wheels that turn, grips, designs and tools to interchange many of the accessories. Many people who enjoy Tech Deck skateboards have never even been on a real skateboard, but that that does not stop them from joining in the fun.

A Tech Deck skateboard is about four inches long and they have wheels just like a regular skateboard. You can also buy ramps and skate parks to add to your collection and you will find yourself learning how to do jumps and flips and landings – with your fingers, of course. A lot of kids (big ones included) compete with their friends and even organize tournaments.

A Tech Deck skateboard is currently a very hot item and a fun and amusing pastime. You will enjoy hours of pleasure creating new stunts and tricks. There are collector fingerboards that come with metal trucks, designer graphics, wheels and grip tape. They also include a sticker. Each one depicts groundbreaking skateboards of the past.

These are like owning a piece of skateboarding history. The fingerboards actually have real wood decks. If you are trapped inside because of a rainy or snowy day, you will have hours of fun learning and creating skateboarding tricks.

Skateboarding can be an art form, a job, a method of transportation or a recreational activity. The later is what Tech Deck skateboards are used for. A surprising variety of tricks can be performed with a fingerboard. These fingerboards are often used by serious skateboards as miniature models to plan their tricks.

Skateboarding is currently being considered as a sport for the 2012 Olympic Games in London so rev up your fingers and get ready to learn new tricks with your Tech Deck skateboards!

You can find Tech Deck skateboards and all their accessories at online sites like Amazon and eBay.

20+ Helpful Tech Gadgets Tips – The Ultimate Troubleshooting Guide

It is no secret that technology has its flaws. When you buy cool tech gadgets they are not guaranteed to be 100% perfect. But sometimes the problem can be misuse of the product due to the buyer not reading the instructions carefully. Hi tech gadgets can present all sorts of problems from having a small glitch to having absolutely no power at all. I’m sure you like everyone else has bought Cool new tech gadgets only to get home to find something wrong with them, not a nice feeling. Here is a check list you should follow after buying tech gadgets:

1) Always read the user manual, this will often show you something you’ve done wrong. Never assume you know everything about it.

2) Check and double check that everything that is supposed to be in the box is actually in the box. People throw away cables or small things because they don’t look thoroughly through the packaging.

3) Be sure you check that all the appropriate accessories have been supplied, these can sometimes be excluded in the factory.

4) If you have bought a device from a foreign country you will need to check the voltage as this may vary. Failure do so could cause a shortage in your house and the destruction of your new high tech gadget.

5) Always check to see if the LED indicator is active, this lets you know that your new tech gadgets are receiving power.

6) Double check the battery is inserted properly; it should fit in nicely and not be loose. Most batteries will have an indicator on them as to which way they should fit.

7) Check the manual to see if all your cables are connected in the correct way.

8) Ensure that your cable is not the problem. You can check a cable by using it in another device that is similar.

9) Make sure that the side of a SIM card with the chip showing is face down in the device and connected.

10) Turning a device on and off can sometime create a power surge that gives a new device the necessary power it need on an initial boot up. This is the reason most Microsoft engineers will ask someone to do this first.

11) It is important to calibrate touch screen devices so that the device can adjust to your unique style of handling it.

13) When connecting to a PC make sure your device is connectable with your operating system whether it’s 32-bit or 64-bit. A 64-bit system is faster than a 32-bit system.

14) When using an SD card or a GSM card make sure it is compatible with your device. Otherwise it simply will not work.

15) When you put media files on a GPS navigator or car DVD players it can confuse the device and it will not know what information to read.

16) Always get reviews from Google on apps or files types you have not tried before to see if there are any issues with them.

17) Always check that your device supports the file format you are trying to use. AVI and DIVX differ at times as AVI is a container and DIVX is a codec.

18) Only perform a factory reset a last resort because you will lose all data and setting previously stored.

19) Don’t flash your firmware unless you’re ready for the full responsibility of repairing it. Most ecommerce stores and electronics retailers treat this as a warranty voiding issue because it is most frequently done incorrectly.

20) Anything extra that you sue on a device uses more power. So, if you’re having a problem with short battery life, it’s a good idea to turn off things like wifi, Bluetooth and screen luminosity.

21) Sellers keep batteries in remotes fresh by changing them or by using a high quality brand.

22) Is your device performing slower, or more choppily than it did the previous day? Perhaps you haven’t given it enough time to ‘boot up’. Always give a device some time to start up. This is because if there are many programs they might take a few moments to boot. There you have it, you now have enough information to be your friends’ and family’s ‘go to guy’ for tech gadgets problems.

Ultrasound Tech Schools – Opportunities For Ultrasound Technicians

Ultrasound tech schools are an outstanding chance for all the students that desire to enter a medical ultrasound tech course. They could as well study management strategies. If you ‘re attracted in pursuing a career as an ultrasound technician, initially you have to get an associate ‘s or bachelor ‘s health-care diploma from one of the ultrasound technician schools, granting you admission to a clinical ultrasound program.

There are various types of ultrasound technician specialties to choose from, depending on your personal area of interest in this medical technology domain, and you can pursue your preparation at any of the ultrasound technician schools, either a vocational one, offering certificates and 2-year Associate degrees (as an example Associate in Specialized Technology Degree), or four-year faculties and universities, leading to a Bachelor of Arts degree.

Depending on the school, admission necessities can vary, some programs may need interviews, entrance assessments and prior allied health experience and recommendation, but all ultrasound tech schools necessitate a high-school diploma or a GED equivalency. Note that all ultrasound tech schools must be certified by the Commission of Accreditation of Allied Health Education Programs (CAAHEP), but students who attend non-AAHEP-certified ultrasound tech schools have the possibility of taking the ARDMS certifying exam after completing a year of work experience.

Usually the curriculum for ultrasound tech schools must cover, in addition to the coursework, hands-on instruction in sonographic physics and instrumentation, gray scale and color-flow Doppler sonography, medical ethics and terminology, human anatomy and physiology, basic obstetric and gynecologic sonography. Ultrasound tech schools may also necessitate the possibility of taking an internship in an ultrasound facility. There you ‘ll be able to study from professionals in this area of activity.

A remarkable figure of certificate and two-year Associate degree applications offered by ultrasound technician schools grant the education for entry-level professions in this domain, but if you are eager to obtain a senior job, you can opt for sections like diagnostic medical sonography (obstetric and gynecologic sonography, diagnostic cardiac sonography, abdominal sonography, vascular technology for bloodflow and hemodynamics, neurosonology for brain and spinal cord). Ophtalmology or ophtalmic biometry involve a four-year Bachelor ‘s certification.

There are different choices for completing an ultrasound technician program in one of the ultrasound tech schools, a number of students are willing to obtain extra qualifications like registration with the ARDMS (American Registry of Diagnosic Medical Sonographers); meanwhile, another part of students choose achieving extra qualifications provided by trade organizations.

Ultrasound technicians specialize in sound wave method so they can get images of patients’ internal tissue and organs. Then the ultrasound technician must assist the physician in decoding the imaging in order to provide the patient an accurate diagnosis. The ultrasound technician profession also deals with a direct interaction with the sufferers, manage their information, add it in the patient history, cope with the facilities and the apparatus.

Graduation from one of the ultrasound tech schools leads to the registration through ARDMS (American Registry of Diagnostic Medical Sonographers) and this offers you more recognition when dealing with potential employers at hospitals or clinics. More frequently then not, the ARDMS credential is seen as a condition of employment for ultrasound technicians.

Mihai is the author of this article. If you are interested to read more, feel free to check his other articles for useful information.

Utah Tech Jobs Gaining in Popularity

Utah has become a favorite place for outdoor hobbies which includes mountain biking (the Moab mountain is often a popular destination for mountain biking enthusiasts), hiking, camping, company outings, boating and and many others. The states natural environment has been preserved for hundreds of years and has become the most popular and visited spot for nature fun and entertainment. Without a doubt, Utah is a place of picturesque beauty coupled with diversity.

Despite Utah’s wealth of natural resources it has furthermore evolved into a hub of recent technological advancements and improvement. Hi-tech products has been in Utah’s historical past since Mormon travelers arrived. The wagon wheel odometer was in fact created by these Mormon travelers and that enabled them to track the number of miles that they traveled. Since that time Utah tech jobs have been readily available to the state’s residents.

Some of the many innovators in the world of technology started out and were educated in Utah. Two really good examples of this include the creators of Silicon Graphics and even Adobe Systems. The person driving the two time Academy Award winning company, Pixar also went to school at the University of Utah. One other prominent person who received their start at the University of Utah was the creator of the gaming console Atari. This is only a handful of the corporations and individuals that started out their careers in the state of Utah.

These days, Utah tech jobs thrive simply because several of the key players within the technology industry are headquartered in Utah. Take for instance computer giant Novell; its famous application, WordPerfect has its home office in Utah. Don’t forget the electronics peripheral manufacturer, Iomega which additionally is headquartered in Utah. Examples of these are just several of the numerous technological corporations founded in this scenic US state.

Salt Lake City, in a recent survey done by the business publication Forbes, has been rated as the best city when considering job offers within the United States. Seventy-nine sizeable IT organizations have their home office in Utah. Nearly 70,000 individuals are holding positions throughout these companies and the pay in Utah is much more rewarding as compared to almost every other city in the United States, in fact it is almost sixty percent more than most.

Regardless of the downward trend in business throughout the world, an astounding sixty-three percent growth was achieved this year alone. It just proves that employment opportunities, particularly Utah tech jobs are experiencing expansion in the technology category. The persistence in industry development and growth is often attributed to Utah’s excellent engineers, a diversified work force whose skill-sets rise above mere technical know-how, and a considerable percentage of individuals who acquire a degree.

On account of these qualities Utah tech jobs are readily available because the increasing number of technical advancements in the area. Individuals in Utah have been known to possess inherent professional values. Establishing a data center facility in Utah can be comparatively less costly than other areas. These are a few of Utah’s workforce’s distinctive skills that make them successful in the tech world.

Understanding that technology is the wave of the future and that it’s the pillar of a growing economy, the Utah local government is usually very supportive of this industry. You can find programs within the state that promote the technology industry like Utah Funds of Funds, which is only one example of the steps taken to support this industry.

Nitro-Tech Hardcore Whey Protein Supplement Review

If you want information on building muscle in as little time as possible read the reviews in this article and decide for yourself if Nitro-Tech Hardcore Whey Supplement is for you. This article will mostly give reviews on Nitro-Tech Hardcore Whey Pro Series, which is its newest line of whey supplements.

My Experience with Nitro-Tech:

This is the number one selling protein in the world today. I tried both of the Old Nitro-Whey isolate and the new series with both resulting in me achieving a more defined body in only 2-3 months.

These were my concerns before trying these supplements
• Taste good
• Contained good supplement information
• Affordable
• Has no adverse side effects

Nitro-Tech mixed well with my system of mixing 8-10 glasses of milk with my protein shakes. They do come in different flavors but I like chocolate and theirs was okay. There are sometimes I rather not eat after a workout session and have found that mixing things like bananas, peanuts, with skim meal can be a very delicious, healthy shake.

I was impressed that Nitro-Tech offered as much as 25g of good whey protein per scoop. I unusually use 1-1/2 scoops of Nitro-Tech per drink, once in the morning and once in the evening right after a workout. I only use one scoop on days that I do not workout.

After using Nitro-Tech Hardcore Protein for some time, I noticed an increase in muscle endurance. My workout regime consists of strength training, running, and hitting the bags at the gym. I found that I was a lot less tired after my workouts and I recovered a lot faster than I usually do. In addition, I experienced less soreness and more energy.

I know that this whey protein is of good quality and was not surprised at that it was so expensive. It comes in a four-pound tube that can last you about to 2-3 weeks if using a minimum of two scoops, twice a day, which can be rather expensive at that rate.

In addition to how expensive the Nitro-Tech Hardcore Protein was my only other negative take on it is that it caused me to have a lot of gas. You do not want to be in closed spaces when taking this one! However, aside from all those things I would definitely recommend this product to anyone who is looking for a quality whey protein that will give them some very noticeable muscle development.

Virginia Tech Hokies Football Aka Beamer Ball

Virginia Tech football, better known as Beamer Ball named after their longstanding coach Frank Beamer, started out the 2010 football season on a down note. Last year in the opener they lost to eventual national champs Alabama, this year another tough loss in a close game to Boise State. Boise State, an up and rising star in the NCAA college football ranks, scored a touchdown late in the game to upset Virginia Tech in what was considered a “home” game for Tech being that the game was played close to the Va Tech campus.

Last year after their opening loss they rebounded to win 10 games, so though it’s a tough loss to swallow, putting them behind the 8 ball in concerns for a national championship, the only real thing alluding Frank Beamer, they have shown a strong backbone in recovering and thriving as the season goes on.

Just the previous two seasons VT won back to back ACC championship games against Boston College and Beamer has had one chance at the big time, when he played Florida State for the 1999 football BCS championship in the Sugar Bowl, but came up short after a valiant effort falling 3 scores behind FSU early in the game.

Beamer Ball on Special Teams is like tailgating to fun, food and games before, during and after the VT games in Blacksburg Virginia. Nothing like the atmosphere and anticipation of watching a quality program that Beamer has built up over a 20 year period, one of the longer tenured coaches. Beamer has been at VT since 1987, before getting the job at his alma mater, he was the coach at Murray State for 6 years and in his last year there they were Ohio Valley Co-Champs.

Now in his 23rd year at Virginia Tech, Beamer with a record of 187-92-2 and 17 consecutive bowls, he’s becoming what Bobby Bowden and Tom Osborne were in the 90’s, a great coach without a National Championship on his resume. A lot of people throughout the country are pulling for coach Beamer to get his “one” to elevate an otherwise great running tenure at a top of the line ACC championship school.

With quarterback Tyrod Taylor, a very capable, mobile, presence in the pocket, VT will generally be in every game with their usual great defense. The past game with Boise State, 3rd ranked team in the nation, was hopefully more of an aberration, they should be favored and win most of their remaining games. So get out the tailgating items, fun and frivolity and root for your favorite teams and if your team is Virginia Tech, you’re in good hands with Frank Beamer.

Even though they suffered a bad loss to a division I-AA foe, which for all intents and purposes will end their chances for a national championship this year, they still can recover and win the ACC and play in a BCS game. The last time they lost 2 straight openers was in 1995 they went on to win the next 10 to finish 10-2, also winning the Sugar Bowl.